C-5003D Multi-Channel High-Speed Machining Center
This is a high-precision CNC machine tool. It has a 460×600×3mm cast iron T-slot worktable (max load 200Kg), X/Y/Z travels 460/500/300mm, and high accuracy (positioning 0.005mm, repeat positioning 0.004mm). Its spindle (max 24,000rpm) uses pneumatic tool change; equipped with a servo chain-type tool magazine with 24T× 3. It has auto grease lubrication, network transmission/monitoring, and fits high-precision industrial manufacturing.
Specifications
| Name | Item | Parameter |
| Worktable | Worktable Dimension (mm) | 460*620 |
| Distance from Worktable to Spindle Nose (mm) | 200～520 | |
| Maximum Load Capacity (Kg) | 200 | |
| Cast Iron T-Slot Worktable | 7-12*80 | |
| Travel | X-axis Travel (mm) | 450 |
| Y-axis Travel (mm) | 500 | |
| Z-axis Travel (mm) | 320 | |
| Spindle | Spindle Motor Power (Kw) | 9.0 |
| Spindle Torque (Nm) | 14.3 / 17.2 | |
| Maximum Spindle Speed (rpm) | 24,000 | |
| Spindle Diameter (mm) | Φ125 | |
| Spindle Tool Change Method | Pneumatic Tool Change | |
| Tool Holder Type | BT30 | |
| Shaft End Static Runout (At 5mm from Spindle End Face on Test Bar) (μm） | ≤2 | |
| Feed Rate | Maximum Rapid Traverse Speed (m/min) | 36 |
| Maximum Cutting Feed Rate (m/min) | 0-10 | |
| Machine Accuracy | Positioning Accuracy: X/Y/Z (mm) | 0.005/ 0.005 / 0.005 (Φ300) |
| Repeat Positioning Accuracy: X/Y/Z (mm) | 0.004/ 0.004 / 0.004 | |
| Circular Interpolation Accuracy (mm) | ≤0.012/ Φ200 | |
| Lubrication Device | Lubrication Method | Automatic Grease Lubrication |
| Power Source | Air Compressor Pressure (Mpa) | ≥0.6 |
| Power Requirement (Kw) | 40 (Max) / 8 (Average) | |
| Tool Magazine | Tool Magazine Capacity | 24T*3 |
| Tool Magazine Type | Chain-type Servo Tool Magazine | |
| Maximum Total Length of Tool Holder + Tool (mm) | 180 | |
| Maximum Tool Diameter (mm) | Adjacent Tool: Φ70, Empty Slot: Φ80 | |
| Other Parameters | Overall Dimension (Front-Back * Left-Right * Top-Bottom mm) | Full Enclosure: 3516 (Including Water Tank) * 2400 * 2679 |
| Weight (Approx.: Kg) | 7500 | |
| Equipped with Network Transmission and Monitoring Functions | Have |
Related Products
C-850E-2DMulti-Channel High-Speed Machining Center
Technical Description of Equipment
-
The design, manufacturing, and inspection of the machine strictly comply with national standards and meet environmental requirements.
-
All components, instruments, and the CNC system of the machine adopt the International System of Units (SI) as the measurement standard.
-
The overall structure features a gantry type design, equipped with an extra-large stable base and high-rigidity M-shaped columns with wide span, ensuring no vibration or deformation during high-speed cutting.
-
Key foundational components are manufactured using high-quality resin sand molding and high-strength cast iron materials, providing the machine with high rigidity and stable precision.
-
Equipped with a volumetric and forced lubrication system to ensure optimal lubrication of all moving parts across the machine.
-
The dual-spindle dual-channel structure design allows independent control of the two heads, enabling the installation of multiple workpieces for simultaneous processing and improved machining efficiency.
-
An integrated electrical cabinet design is adopted, featuring a heat exchanger installed on the cabinet. This creates a sealed internal environment without temperature rise, protecting electrical components from premature aging and reducing failure rates.
-
Fitted with a Syntec CNC system, ensuring stable machine control while meeting user requirements for CNC machining functions and auxiliary features.
C-600-2DMulti-Channel High-Speed Machining Center
Equipment Technical Description
The C-600-2D Dual-Channel High-Speed Machining Center is a fixed-gantry machine tool, designed as a highly efficient and high-precision CNC machining center. It features the following characteristics:
C-400-3D Multi-Worktable High-Speed Machining Center
The C-400-3D is ideal for the roughing and finishing of parts such as mobile phone frames, SIM card trays, hinges, tablet casings, and 5G-related plates, shells, and box components in the 3C industry. It is also suited for the mass production of panels and cover parts in industries such as instrumentation and electronics.