C-1000-4 Multi-Head Vertical Machining Center
C-1000-4 Multi-Head Vertical Machining Center: 1050500mm table, X270/Y450/Z150mm travel, 4Kw 40000rpm spindles, 16T4 magazine, network/tool setter.
Specifications
| Name | Item | Parameter |
| Worktable | Worktable Size (mm) | 1050 * 500 |
| Distance from Worktable to Spindle Nose (mm) | 125～275 | |
| Maximum Load Capacity (Kg) | 250 | |
| Aluminum T-slot Worktable | 5-12*80 | |
| Travel | X-axis Travel (mm) | 270 |
| Y-axis Travel (mm) | 450 | |
| Z-axis Travel (mm) | 150 | |
| Spindle | Spindle Spacing (mm) | 250 |
| Spindle Power (Kw) | 4 | |
| Maximum Spindle Speed (rpm) | 40,000 | |
| Spindle Diameter (mm) | Φ80 | |
| Spindle Tool Change Method | Pneumatic Tool Change | |
| Tool Holder Type | ISO 20 | |
| Shaft End Static Runout (At 5mm from Spindle End Face on Test Bar) (μm) | ≤2 | |
| Feed Rate | Maximum Rapid Traverse Speed (m/min) | 30 |
| Maximum Cutting Feed Rate (m/min) | 0-10 | |
| Machine Accuracy | Positioning Accuracy: X/Y/Z (mm) | 0.005/ 0.005 / 0.005 (300mm) |
| Repeat Positioning Accuracy: X/Y/Z (mm) | 0.004/ 0.004 / 0.004 | |
| Circular Interpolation Accuracy (mm) | ≤0.015/φ300 | |
| Spindle Cooling | Cooling Capacity of Spindle Cooling System (W) | ≥2000 |
| Lubrication Device | Lubrication Method | Automatic Grease Lubrication |
| Power Source | Air Compressor Pressure (Mpa) | ≥0.6 |
| External Vacuum Source Interface | φ19 Inner Diameter, 2m Length | |
| Power Requirement (Kw) | 23.5 (Maximum) / 5 (Average) | |
| Tool Magazine | Tool Magazine Capacity | 16T*4 |
| Tool Magazine Type | Servo In-line Tool Magazine | |
| Other Parameters | Overall Dimension (Front-Rear * Left-Right * Top-Bottom mm) | Full Enclosure: 2330*2300*2320 (Including Three-Color Light) |
| Weight (Approximate: Kg) | 3800 | |
| Equipped with Network Transmission and Monitoring Function? | Yes | |
| Equipped with Tool Setter? | Yes |
Related Products
T-1500-4 Multi-Head Vertical Machining Center
This machining center has a 1500×500mm cast iron T-slot workbench (max load 600Kg), X/Y/Z travels 410/450/260mm. Spindle: 3.7/5.5Kw, 20000rpm, Φ100mm, pneumatic-hydraulic tool change (BT30). X/Y/Z positioning accuracy 0.005mm, repeat 0.004mm. 21T×3 chain servo tool magazine. With network transmission, monitoring, tool setter.
C-1100-2/3/4 Multi-spindle high-speed machining center
C-1100-2/3/4 is ideal for roughing and finishing processes of aluminum parts, housings, and radiators in the new energy vehicle industry.
C-1200-6 Multi-spindle high-speed machining center
C-1200-6 is ideal for the mass production of small aluminum alloy components for 3C consumer electronics, such as mobile phone camera brackets, buttons, and smartwatch housings.